<center id="hh65c"><noscript id="hh65c"></noscript></center>
    <nav id="hh65c"></nav>

    <sub id="hh65c"><table id="hh65c"></table></sub>

    <nav id="hh65c"><listing id="hh65c"></listing></nav>
    <wbr id="hh65c"></wbr>
    1. 歡迎來到- 無錫艾力科數控設備有限公司 的官方網站,   數控輪轂外圈溝磨床、球軸承套圈磨超自動線、超精機!
      全國銷售與服務熱線
      0510 - 83293888
      產品展示product
      MG1050B高精度無心磨床
      High Precision Centerless Grinder

      主要用途

      本機床適用于幾何精度和表面質量要求高的各種圓柱體零件、環形零件的無心通磨磨削,也適用于圓錐角不大于3°圓錐體零件和各種成型旋轉零件的無心切入磨削,尤其適用于大批量的生產要求。

      Application

      This machine can be used for through feed grinding of cylindrical and ring type parts with high accuracy and surface finish and also for plunge feed of taper parts with a taper smaller than 3°and formed parts.It can also be used for mass production.

      結構特點

      1、砂輪主軸采用懸臂動壓軸承,導輪主軸采用滾動軸承雙支承結構;

      2、砂輪修整器進給運動由伺服電機驅動滾珠絲桿來實現,導輪修整器、手動進給,砂、導輪修整器往復運動均由油缸來實現

      3、導輪主軸驅動用交流電機經變頻實現無極調速

      4、機床主進給由伺服電機經滾珠絲桿螺母副帶動導輪架進給與補償

      5、電氣采用三菱控制系統(用戶指定)。

      Main structural features

      1.The grinding wheel spindle adopts the cantilever type dynamic bearing, while reg.wheel spindle is dually supported by the rolling bearing.

      2.The servo motor drives the ball-screw to perform feed movement of gri.wheel dresser.Reciprocating Movement of regulating & grinding wheels and Manual feed are achieved by the oil cylinder

      3.The erg.Wheel spindle is driven by a AC freq.Conversion motor to achieve a stepless speed-regulation.

      4.Reg.Wheelhead feed & comp.is performed by a Servo motor through a ballscrew and nut pair.

      5.Mitsubishi control system is adopted.

      工作精度

      (標準試件Φ20×90mm)

      圓度:  0.001mm

      圓柱度:0.0015mm

      粗糙度:Ra0.16um

      Working accuracy

      (Standard testing workpiece Φ20×90mm)

      Roundness:0.001mm

      Cylindricty: 0.0015mm

      Roughness:Ra0.16um

      技術參數

      Technical Parameter

      磨削工件直徑
      Dia. Of work to be ground
      5~50mm
      磨削工件長度
      Length of work to be ground
      通磨
      Through feed
      200mm
      切入磨
      Plunge-in feed
      145mm
      砂輪規格
      Grinding wheel spec.
      P500×150×305mm
      導輪規格
      Regulating wheel spec.
      P350×150×177.8mm
      砂輪轉速
      Grinding  wheel speed
      1330r/min
      導輪轉速(無極)
      Swivel angle of reg.wheel
      10~290r/min
      導輪回轉角
      Swivel angle of reg.wheel
      垂直面內
      In a vertical plane
      -2°~+7°
      水平面內
      In a horizontal plane
      0~+3°
      導輪軸向位移調整量
      Axial displancement of reg.wheel
      ±5mm
      導輪架小進給值
      Min.feed amount of reg.wheelhead
      1μm
      砂輪修整器小進給值
      Min.feed amount of gri.wheel dresser
      1μm
      導輪修整器每格進給值
      Reg.wheel dresser feed amount per division
      0.01mm
      導輪修整器在水平面內的回轉角
      Swivel angle of reg.wheel dresser in a horizontal piane
      -2°~+7°
      導輪修整器金剛占位移調整量
      Displacement of reg.wheel dresser diamond
      ±15mm
      砂輪與導輪中心連線至托架底面距離
      The distance between the centerlines  of gri.&Reg.wheels and work rest bottom
      200mm
      砂輪與導輪中心連線至床身底面距離
      The distance between the centerlines of gri.&Reg.wheels and bed bottom
      1050mm
      機床總功率
      Total power of machine
      22kW
      機床外形尺寸
      Overall dimension of machine
      355cm×270cm×200cm
      機床凈重
      Net weight of machine
      約5000kg